9-28-03
Dear Folks...
Attached are a couple of photos of my Wee Hunk.
My initial handling concerns vanished with the addition of deeper skegs, as I found out it was actually planing on the 3" wide strip skegs as per plans!!! 2 pieces - 1 1/2" stainless angle X 3 ft long added to the existing skegs (aft) greatly improved the directional stability at speed with little effect on handling through turns.
This one tough boat, taking big water easily at sensible speeds. It provides a very dry ride in rough seas.
Thanks for a great design.
Regards to all
Don Rasmussen
Oakville, Canada
